User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Changing the Printer Settings
37
3
Communication Settings 3
With [Communication settings] in the Printer Setting Tool, the printer communication information can be
specified or changed when connecting the printer and computer with a USB cable or via a Bluetooth
connection (RJ-2030/2050/2150 only). Not only can you change the communication settings for one printer,
but you can also apply the same settings to multiple printers.
Settings Dialog Box 3
1 Disable these settings
When this check box is selected, appears in the tab, and the settings can no longer be specified or
changed.
Settings in a tab where appears will not be applied to the printer even if [Apply] is clicked. In addition,
the settings in the tab will not be saved or exported when the [Save in Command File] or [Export]
command is executed.
To apply the settings to the printer or save or export them, make sure you clear the check box.
2Items
When [Current Status] is selected, the current settings appear in the settings display/change area.
Select the item for the settings that you want to change.
3 Menu Bar
4Printer
Lists the connected printers.
5 Node Name
Displays the node name (nodes can be renamed). (See 7 Change Node Name/Bluetooth Device Name in
Menu Bar on page 39.)
7
8
5
6
9
10
3
4
1
2