User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Changing the Printer Settings
47
3
Wireless Settings 3
1 Communication Mode
Select [Infrastructure] or [Ad-hoc].
2 SSID (Network Name)
Clicking [Search] displays the available SSID selections in a separate dialog box.
3 Channel
Lists available channels.
Note
• This setting is valid only in Ad-Hoc mode.
• Not all computers, mobile devices, and operating systems, may support Ad-hoc mode.
4 Authentication Method/Encryption Mode
The supported encryption modes for the authentication methods are as shown in Communication Modes
and Authentication Methods/Encryption Modes on page 48.
5WEP Key
You can specify a setting only when WEP is selected as the encryption mode.
6 Passphrase
You can specify a setting only when WPA/WPA2-PSK is selected as the authentication method.
7 User ID/Password
You can specify settings only when LEAP, EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. To register a certificate, connect to the printer from a web browser, and then
specify the certificate. For more information on using a web browser, see Web Based Management
on page 120.
8 Display the key and password on-screen
If this check box is selected, keys and passwords are displayed in plain (non-encrypted) text.
1
2
5
6
8
3
4
7