User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Changing the Printer Settings
52
3
Device Settings 3
With [Device settings] in the Printer Setting Tool, printer settings can be specified or changed when
connecting the printer and computer with a USB cable or via a Bluetooth connection (RJ-2030/2050/2150
only). Not only can you change the device settings for one printer, but you can also apply the same settings
to multiple printers.
When printing from a computer application, various print settings can be specified from the printer driver;
however, by using [Device settings] in the Printer Setting Tool, more advanced settings can be specified.
When [Device settings] is opened, the printer’s current settings are retrieved and displayed. If the current
settings could not be retrieved, the previous settings are displayed. If the current settings could not be
retrieved and previous settings have not been specified, this tool’s factory settings are displayed.
Settings Dialog Box 3
1 Menu Bar
Select a command contained in each menu from the list.
2Printer
Specifies the printer whose device settings are to be configured.
If only one printer is connected, it is unnecessary to make a selection because only that printer will appear.
3 Settings Tabs
Contains settings that may be specified or changed.
Note
If appears in the tab, the settings in that tab cannot be specified or changed. In addition, the settings
in the tab will not be applied to the printer even if [Apply] is clicked. The settings in the tab will also not be
saved or exported when the [Save in Command File] or [Export] command is executed.
5
7
8
1
2
4
3
6