User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Changing the Printer Settings
57
3
7 Align Paper Leading Edge when the Cover is Closed
Select whether or not the paper is automatically fed when the cover is closed.
Available settings: [Feed], [Do not Feed]
8 Printing Reference Point Adjustment Along Label Width / Printing Reference Point Adjustment
Along Label Length
Adjust the position of the reference point (point of origin for printing). This corrects printing misalignments
resulting from differences in printer models or from the fixed margins of some applications.
The reference point cannot be adjusted for raster printing.
9 Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: -0.39" to 0.39" (-10.0 mm to 10.0 mm)