User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
Changing the Printer Settings
61
3
Applying Setting Changes to Multiple printers 3
1 After applying settings to the first printer, disconnect the printer from the computer, and then connect the
second printer to the computer.
2 Select the newly connected printer from the [Printer] drop-down list.
3 Click [Apply].
The same settings that were applied to the first printer are applied to the second printer.
4 Repeat steps 1 – 3 for all printers whose settings you want to change.
Note
To save the current settings in a file, click [File]- [Export].
The same settings can be applied to another printer by clicking [File]- [Import], and then selecting the
exported settings file. (See Device Settings on page 52.)