User's Guide
Table Of Contents
- User’s Guide RJ-2030/RJ-2050/RJ-2140/RJ-2150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Battery Installation/Removal
- Recharging the Battery
- Turning the Printer On or Off
- Setting the Language of the LCD
- Inserting the Paper or Label Roll
- Removing the Receipt/Label Roll
- Attaching the Belt Clip
- Install Software to Your Computer or Mobile Device
- Connecting the Printer to a Computer or Mobile Device
- LCD
- 2 Using the Printer
- 3 Changing the Printer Settings
- 4 Other Functions
- 5 Maintaining the Printer
- 1 Setting Up the Printer
- Section II: Application
- Section III: Wireless network (RJ-2050/2140/2150 Only)
- Section IV: Appendix
71
4
4
Printing the Printer Information 4
You can use the (Feed) button to print a report that lists the following printer information:
Program version
Printer usage history
Missing dot test pattern
Printer settings information
List of transferred data
Network setting information
Note
• You can use the Device settings to set in advance which items will be printed (see Device Settings
on page 52).
• The node name appears in the Printer Settings. The default node name is “BRWxxxxxxxxxxxx”.
(“xxxxxxxxxxxx” is based on your printer’s MAC Address/Ethernet Address.)
• This operation can also be performed using the Printer Setting Tool.
1 Make sure that a roll of receipt paper has been loaded and the media roll compartment cover is closed.
2 Turn on the printer.
3 Press and hold the (Feed) button until [Printing] appears on the LCD. The printer information will
be printed.
Other Functions 4