Owner's Manual

3 Pull back on the slide and eject the cartridge in the chamber.

Lock the slide to the rear by sliding the slide release/stop latch up.

4 Inspect the chamber to ensure no cartridge is present.

5 When you are certain your rifle is fully unloaded, push down on

the slide release/stop latch and allow the slide to return forward.

6 Place the “safety” in the on safe position.

UNLOADING THE MAGAZINE

1 Depress the magazine release and remove the magazine.

Remember, merely removing the magazine does not mean the

chamber is unloaded.

2 Unload the rifle as explained previously, make sure the chamber is

completely unloaded.

3 Strip the cartridges from the magazine by pushing forward on the

rim of the top cartridge and sliding each cartridge out, one at a

time, as each moves up in the magazine.

4 Unload any extra magazines.

DRY FIRING

DO NOT DRY FIRE THE BUCK MARK RIFLE. DRY FIRING MAY DAMAGE THE

FIREARM COMPONENTS, POSSIBLY RENDERING THE FIREARM INOPERABLE.

SIGHT ADJUSTMENT

BEFORE PERFORMING SIGHT ADJUSTMENT PROCEDURES, MAKE SURE

YOUR RIFLE IS COMPLETELY UNLOADED. REMOVE THE MAGAZINE, CHECK

THE ACTION AND CHAMBER FOR CARTRIDGES. KEEP THE MUZZLE

POINTED IN A SAFE DIRECTION. FAILURE TO FOLLOW THESE WARNINGS

COULD RESULT IN SERIOUS INJURY OR DEATH.