Owner's Manual

3
Please read and understand all of the cautions, warnings, notices,
proper handling procedures and instructions outlined in this owner’s
manual before using your new firearm.
1 ALWAYS KEEP THE MUZZLE OF YOUR FIREARM POINTED IN A SAFE
DIRECTION EVEN THOUGH YOU ARE CERTAIN IT IS UNLOADED.
Never point any firearm at anything you do not intend to shoot.
Be extremely alert and aware of all persons and property within
the range of your ammunition.
2 NEVER RELY TOTALLY ON YOUR FIREARM’S MECHANICAL “SAFETY”
DEVICE. LIKE ANY MECHANICAL DEVICE, A “SAFETY” CAN SOMETIMES
FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN
UNSAFE CONDITION.
The word “safety” describes a firearm’s trigger block mechanism,
sear block mechanism, hammer block mechanism or firing pin
block mechanism. Mechanical “safeties” are designed to place your
firearm in a safer status, and no guarantee can be made that the
firearm will not fire even if the “safety” is in the on safe position.
Mechanical “safeties” merely aid safe gun handling and are no
excuse for pointing your firearm’s muzzle in an unsafe direction.
See “Operation of the Safety” on page 11 for instructions on the
operation of this firearm’s “safety.”
Remember, safe gun handling does not stop with your firearm’s
mechanical “safety” devices, it starts there. Always treat this firearm
with the respect due a loaded, ready-to-fire firearm.
Some firearms do not have a mechanical “safety.” Many target
firearms, lever-action firearms and pistols do not have manual
“safety” mechanisms. Therefore it is critical to read and
understand the owner’s manual for every firearm which explains
the safe operation of the firearm.
While it is a good idea to “test” your firearm’s mechanical “safety”
periodically for proper function, never test the “safety” while your
firearm is loaded or pointed in an unsafe direction.