Owner's Manual

Make certain you have the proper
spacer installed properly before
re-attaching the buttstock and
recoil pad (Figure 7-C.)
Fit the buttstock back to the
receiver, install the plate, washer
(making sure the bevels mate —
Figure 7-D), and the stockbolt.
Snug the stockbolt down with the
3/4" socket wrench, but do not
overtighten. Attach the buttpad
with care, so as not to scratch or
mar the finish of the stock.
20
FIGURE 7-B
Loosen stock bolt inside the buttstock.
FIGURE 7-C
Install the proper spacer before re-attaching
the buttstock.
FIGURE 7-D
The bevels must mate.
00479BFA/Fusion OM 8/11/03 3:55 PM Page 20