Owner's Manual

fully inside the magazine tube. It will make an audible click when
fully inserted.
LOADING THE CHAMBER MANUALLY FROM
THE MAGAZINE — SPEED LOADING
1 Make sure the muzzle is pointed in a safe direction and the safety is
in the “on safe’’ position.
2 With the bolt open, insert a shell into the magazine. The shell will be
automatically cycled from the magazine to the chamber.
KEEP YOUR FINGERS CLEAR OF THE EJECTION PORT.
3 Load the magazine to full capacity as explained previously.
CAUTION: WHENEVER A SHELL HAS BEEN CYCLED INTO THE CHAMBER
— AUTOMATICALLY OR MANUALLY — THE SHOTGUN IS READY TO
FIRE BY SIMPLY MOVING THE SAFETY TO THE “OFF SAFE” POSITION.
UNLOADING
CAUTION: WHENEVER UNLOADING, ALWAYS BE CERTAIN THAT THE MUZZLE
IS POINTED IN A SAFE DIRECTION AND THAT THE SAFETY IS IN THE “ON
SAFE” POSITION.
1 Unload your Gold Fusion shotgun by grasping the operating handle
and cycling the action until all rounds are ejected.
ALWAYS INSPECT THE CHAMBER, ACTION, CARRIER AND MAGAZINE
VERY CAREFULLY AFTER UNLOADING TO BE SURE ALL LIVE ROUNDS
ARE CLEARED FROM THE GUN.
BREECH REMAINS OPEN AFTER THE LAST SHOT
The breech of the Gold Fusion shotgun remains open, with the
bolt locked to the rear, after the last shot has been fired. This allows
convenient and fast reloading.
1 Place the safety in the “on safe” position.
2 Drop an appropriate shell into the open breech or into the magazine.
3 Close the action by depressing the carrier release button.
4 Load the magazine.
23
00479BFA/Fusion OM 8/11/03 3:55 PM Page 23