Owner's Manual

TUBE INSTALLATION
1 Place the “safety” in the “on safe” positon. Completey unload your
Gold Fusion shotgun by oppening the action and locking it rearward.
INSPECT THE CHAMBER, FEED MECHANISM AND MAGAZINE TO MAKE
SURE THEY DO NOT CONTAIN ANY SHELLS.
2 Before installing a tube, check the internal choke tube threads in the
muzzle, as well as the threads on the Invector choke tube to be sure they
are clean. Lightly oil the threads with an oil such as Browning Gun Oil.
3 Using your fingers, screw the appropriate tube into the muzzle end
of the barrel, tapered end first, notched end outward. When it
becomes finger-tight, use the Invector choke tube wrench to firmly
seat the tube.
THE INVECTOR CHOKE TUBE SHOULD BE PERIODICALLY CHECKED TO
ASSURE THAT IT IS TIGHT AND FIRMLY SEATED. BEFORE CHECKING,
FOLLOW THE SAFETY GUIDELINES OUTLINED ABOVE.
Replacement and additional tubes and wrenches are available from
your Browning dealer, or by writing:
Browning Consumer Department
One Browning Place
Morgan, Utah 84050-9326
[phone].
Canadian customers please call or write:
Browning Canada Sports Ltd./Ltee
5617 Chemin St-Francois
St-Laurent, Quebec H4S 1W6.
[phone].
26
00479BFA/Fusion OM 8/11/03 3:55 PM Page 26