Owner's Manual

12 13
3 If necessary, the BOSS may be removed to facilitate cleaning
your rifle.
NOTICE! WHEN CLEANING THE BAR WITH THE BOSS REMOVED, THE
PLASTIC CAP (CROWN AND ACCURACY PRESERVER) PROVIDED WITH
THE RIFLE SHOULD ALWAYS BE USED TO PROTECT THE MUZZLE
CROWN. ALWAYS MAKE SURE THE CAP USED MATCHES THE CALIBER
OF THE RIFLE BEING CLEANED. THE CALIBER IS MARKED ON THE
END OF THE CAP.
Clean the BOSS by unscrewing the body and micro-adjustable
lock nut from the rifle. With the components disassembled, wipe
each component with oil. Browning Oil is excellent for this
application. Lightly oil all threads and make sure the exhaust
ports are free of obstructions.
NOTICE! REMEMBER TO REMOVE THE PLASTIC CAP WHEN
REASSEMBLING THE BOSS ON THE BAR.
4 Reassemble your BOSS by screwing on the micro-adjustable lock
nut and then the BOSS body. After taking apart the BOSS, it will
be necessary to reset the Sweet Spot.
MAKE CERTAIN ALL CLEANING PATCHES ARE REMOVED FROM THE
BARREL AND EXHAUST PORTS IN THE BODY OF THE BOSS BEFORE
FIRING YOUR RIFLE. FAILURE TO DO SO MAY CAUSE SERIOUS
INJURY OR DEATH TO YOURSELF OR OTHERS, AND CAUSE DAMAGE
TO YOUR RIFLE.
5 After cleaning the bore, it is recommended two fouling shots
be fired before firing for extreme accuracy. Additionally, it is
recommended the rifle be allowed to cool after every three shots.
S E R V I C E O R R E P A I R
If your firearm should require service or repairs, we suggest you first
contact a local recommended Browning Firearms Service Center.
To locate a service center visit browning.com, contact our Customer
Service Department or your Browning firearms dealer for the address
of the Service Center nearest you. Otherwise, you may send your
firearm directly to our Service Department in Arnold, Missouri.
Parts listings, Firearm Service Center lists, service procedures, service/
repair form and general product information are also found on the
internet at browning.com. For technical questions about your firearm
or service, contact:
When returning your firearm for servicing, you must do the following:
1 Be sure it is completely unloaded.
2 Remove the scope or other optics.
3 Package it securely in a cardboard container.
4 Enclose the service/repair form available at browning.com or a
letter that clearly describes the trouble experienced, the
ammunition used and the repairs desired. Also include your name
and a daytime phone number where you can be reached.
5 If convenient, send a copy of the service/repair form or letter
to us separately.
6 Never return ammunition with your firearm. It is against postal
and most commerce regulations.
United States customers:
Browning Firearm Status and
Technical Service
One Browning Place
Arnold, MO 63010-9406
Phone: [phone]
Canadian customers:
Browning Canada Sports Ltd/Ltée
5583 Chemin St-François
St-Laurent, Quebec H4S 1W6
Phone: [phone]