SDS

Safety Data Sheet
Armstrong Z-1 Quick Dry Wood Filler
SDS Revision Date:
04/21/2015
Page 4 of 10
7. Handling and storage
7.1. Precautions for safe handling
See section 2 for further details. - [Prevention]:
7.2. Conditions for safe storage, including any incompatibilities
Handle containers carefully to prevent damage and spillage.
Incompatible materials: Avoid strong oxidizing agents.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Keep from freezing. Recommended storage
temperature is below 90 degrees F.
OTHER PRECAUTIONS: None.
WORK SITE ENVIRONMENT: Initially there may be a potential adverse impact on indoor air quality within the
general work area during the installation process. Therefore you should advise the building manager or other
appropriate person that: It will be necessary to establish and maintain adequate ventilation of the work area, without
causing the entry of contaminants to other parts of the building. Persons who are sensitive to odors and/or chemicals
should be advised to avoid the work area during this process.
See section 2 for further details. - [Storage]:
7.3. Specific end use(s)
No data available.
8. Exposure controls and personal protection
8.1. Control parameters
Exposure
CAS No.
Ingredient
Source
Value
0001317-65-3
Calcium carbonate
OSHA
TWA 15 mg/m3 (total) TWA 5 mg/m3 (resp)
ACGIH
TWA: 10 mg/m3 Ceiling: 20 mg/m3
NIOSH
TWA 10 mg/m3 (total) TWA 5 mg/m3 (resp)
Supplier
No Established Limit
0002634-33-5
1,2-Benzisothiazol-3(2h)-one
OSHA
No Established Limit
ACGIH
No Established Limit
NIOSH
No Established Limit
Supplier
No Established Limit
0024980-61-8
ACETIC ACID ETHENYL ESTER,
POLYMER WITH 2-PROPENAM
OSHA
No Established Limit
ACGIH
No Established Limit
NIOSH
No Established Limit
Supplier
No Established Limit