Instructions

GB - 11
See below to select the appropriate rotation speed:
 Low rotation speed (Setting 1) is for drilling into non pre-worked materials, for screwing,
mixing paints, or for drilling into ceramics.
 The high rotation speed (Setting 2) is for drilling into metal and plastic.
Torque settings
The battery powered drill is fitted with a torque setting.
 Rotate the ring (2) to adjust the torque, to achieve different screw thread projections. The
higher the adjustment number, the higher the torque.
 For drilling, turn the ring (2) to the drill-symbol, which will provide the highest possible torque.
Switching the tool on and off
 Squeezing the operating button (5) will switch the tool on.
 Releasing the operating button (5) will switch the tool off.
Servicing and maintenance
The battery powered drill is maintenance-free.
Clean the housing occasionally with a dry cloth. Do not use cleaning agents, as these can
damage the housing.
2 Year Warranty
The warranty period for this appliance begins on the date of purchase. You will need to show us
the purchase date by producing the original purchase receipt.
We guarantee the following during the warranty period:
 Free removal of possible problems.
 Free replacement of all parts, where these are defective.
 Completely free expert service (i.e. free maintenance by our specialist staff)
This is conditional on the fault not being due to inappropriate treatment.
Please refer any further enquiries or quality issues directly to the manufacturer:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur-Service
Lempstr. 24
42859 Remscheid
Tel.: +49 2191 / 37 14 71
Fax: +49 2191 / 38 64 77
Email: [e-mail]