BT Decor 1100 User Guide Please note that you require 4 x AA batteries for the 1571 feature to work. These are not included.
Welcome… to your BT Decor 1100 Corded Telephone • Three one-touch memory buttons for easy dialling of your most important numbers. • Quickdial memory to store 10 more useful contact numbers. • Secrecy feature lets you talk to someone else close by without your caller hearing you. • Last number redial at the touch of a button.
Getting started 2 Location You need to place your BT Decor 1100 within 3 metres of a telephone socket so that the cable will reach. Your BT Decor 1100 can be wall mounted, see Wall mounting your phone, on page 11. Insert 4 x AA batteries You will need to insert 4 x AA Alkaline recommended 1.5V batteries (not supplied) for the 1571 feature to work. • Please note You will still be able to make and receive calls without the batteries fitted.
3 Getting started Connecting the handset to the base Turn the phone over and connect the curly handset cord into the socket marked with the symbol. Turn the phone back over and position the handset on the receiver. Removing the base plinth (optional) Your BT Decor 1100 will come with the base plinth already attached. If you want to use your BT Decor 1100 on a flat surface such as a table or desk then we advise you to leave the plinth attached.
4 Getting to know your phone Corded telephone BT Handset hook Rotates to hold the handset in place when wall mounted. 1 Store button (under OneTouch Memory Card) Use to store one-touch memory and quickdial numbers. M1 M2 M3 M4 M5 M6 M7 M8 M9 M0 Redial button Redials the last number called. Underneath your phone: P TE TB Mode Mode switch Use to change the dial mode. R1 R2 R3 Ringer Hi Lo Off Ringer Vol. Ringer Switch Use to change the ringer melody.
Call light Red light flashes to indicate an incoming call. 3 One-Touch Memory buttons Use to store and automatically dial up to three numbers at the touch of one button. T Decor 1100 2 3 Memory button Use to dial up to 10 quickdial numbers. R (Recall) button Press and hold to enter a pause when storing a number in the memory 1571/Messages button* Press to automatically dial 1571 to easily access BT Answer 1571 or Call Minder.
6 Using your phone Making and ending calls Make a call 1. Lift the handset and wait for the dial tone. 2. Dial the telephone number. End a call Replace the handset. Receive a call When you receive a call, the telephone rings and the red call light flashes. Simply pick up the handset to answer the call. Redial the last number called 1. Lift the handset. 2. Press the A redial Store number can button. The last number called is dialled. be no longer than 32 digits.
7 Ringer Mode Using your phone Adjust the ringer volume There are 3 volume settings to choose from: HIGH, LOW or OFF. The default setting is High (Hi). If the ringer is set to OFF, the call light will still flash to indicate when someone is calling you. Turn the phone over and move the Ringer Vol. Switch to the volume you want: Hi, Lo or Off. R1 R2 R3 Hi Lo Off Ringer Vol. Set the ringer melody There are 3 ringer melodies to choose from. The default melody is R1.
8 Using your phone One-Touch memories You can store your three most frequently used telephone numbers in the One-Touch memories (1, 2 or 3). The one-touch memory card (located around the one-touch buttons) can be used to keep a record of your one-touch memory numbers/contact names. Lift the plastic plate up and you can write on the card. BT Decor 1100 Decor To store a One-Touch number The Store button is located underneath the one-touch memory card.
9 Using your phone Quickdial memories You can store a further 10 telephone numbers in the Quickdial memories. There is a quickdial memory card located under the handset on your BT Decor 1100 which can be used to keep a record of your quickdial memory numbers / contact names. Lift the plastic plate up and you can write on the label. Please note that quickdial numbers can be a maximum of 32 digits long. To store a number in the Quickdial memory 1. Lift the handset. 2. Press the Store button.
10 Using your phone 5. Replace the handset. Alternatively, any existing number stored in the Quickdial or One-Touch memory can be overwritten by entering a new number in the same memory location. Simply follow the instructions for storing numbers as previously shown. Place the handset back on the receiver at any time to cancel storing. During all storing operations the red secrecy light will flash.
11 Using your phone • IMPORTANT After an incoming call, or after lifting the handset, your BT Decor 1100 will check the line for any messages. You will experience at least a 2 minute delay before the message waiting indicator light flashes if messages have been left.
12 Help Phone does not ring • Check that the telephone line cord is correctly connected. • Check that the Ringer switch on the back of your BT Decor 1100 is not set to ‘Off’. Your caller cannot hear you • Is the red button light on? If so, secrecy is switched on. Press the button to speak to your caller again. 1571 button does not work • You must subscribe to BT’s Call Minder or 1571 Service for the Store1571 button to work. See page 10.
13 General information The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill. Product disposal instructions for residential users When you have no further use for it, please remove any batteries and dispose of them and the product as per your local authority’s recycling processes.
14 General information Within the 12 month guarantee period: In the unlikely event of a defect occurring, please return the product, with the receipt, to the place of purchase. Outside of the 12 month guarantee period: If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you contact BT’s approved repair agent, Helpdesk Solutions on 0870 240 5029 or a local qualified repairer.
73mm Wall mounting template Visit us at www.bt.com Offices worldwide The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2008. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No.