User`s guide

5
Remarks:
1. You must follow the procedure above to set the ID of receiver, mouse and
keyboard. Once the receiver ID button is pressed you have 30 seconds to
complete the entire process, or you will need to begin again.
2. Once the keyboard and receiver are plugged in, the yellow receiver light will
flash. Once the ID is set, it will remain steadily light.
3. When changing the batteries of keyboard or mouse, there is no need to
reset all the ID’s. Simply reset one of them.
4. When keyboard batteries are low, a battery low icon
will show on the
right-bottom corner of the Windows task bar.
5. When mouse batteries are low, a battery low icon
will show on the
right-bottom corner of the Windows task bar.
6. The optical mouse is designed to conserve battery life and will enter a power
saving “Sleep” mode if it is inactive for 20 minuties. Click a button on the
mouse to wake it up. Move the mouse does not wake it up.
Detachable Palmrest
At your discretion, you may choose to connect the palmrest with keyboard.
To connect the palmrest with the keyboard please follow figure 1 & figure 2.
Figure 1
Figure 2