Install Instructions

Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 2012/10

We reserve the right to make any changes due to technical modifications.

Boiler block assembly7

7.1 Assembly when delivered in sections

z Assemble all boiler sections in accordance with the

following instructions and diagrams.

7.1.1 Preparing boiler sections

z Position the rear section onto two wood blocks.

z Clean the boiler hubs with sandpaper and a rag.

z Remove any burrs with a file.

z Clean the packing spring or packing groove with a

wire brush and rag.

z Clean the hub sealing faces with a rag soaked in

cleaning agent.

z Evenly coat the boiler hub sealing faces with red lead

putty.

z Coat the packing spring or packing groove with

adhesive (adhesive base).

Fig. 5 Remove burrs

1 Boiler hubs

2 Back section

3 Wood blocks

4 Sealing spring

CAUTION!

RISK TO HEALTH and

DANGER OF BURNS

due to released vapors and easily

flammable cleaning agents.

z When using red lead putty, adhesives

and solvents ensure adequate

ventilation inside the installation room.

z When using solvents, avoid open

flames, incandescence and sparks.

z Please observe the manufacturer's

handling and safety instructions.

Fig. 6 Coat boiler hubs with red lead putty

1 Boiler hub sealing face

2 Sealing spring