Install Instructions

Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 2012/10

We reserve the right to make any changes due to technical modifications.

Boiler block assembly7

7.1.4 Inserting the section sealing

z Unroll the required length of section sealing from the

roll supplied.

z Peel the backing paper from the sealing rope as you

insert the cord into the packing groove.

z Insert the flexible sealing rope into the packing

groove starting in the upper boiler hub area, and

lightly press in.

z Overlap sealing rope 3/4" at the joins and press in

well.

7.1.5 Knock intermediate section into place

z Turn the intermediate section around and locate with

the upper and lower boiler hubs on the nipples of the

rear section.

z Drive the intermediate section onto the rear section

using a wood or a rubber mallet.

Fig. 9 Inserting the section sealing rope

CAUTION!

SYSTEM DAMAGE

due to leaking boiler sections.

z To ensure that the faces between the

boiler sections are sealed correctly

never stretch the sealing rope during

application.

z Carefully insert the sealing rope into the

boiler section packing grooves.

Fig. 10 Knock intermediate section into place

1 Wood or rubber mallet

2 Rear section