Install Instructions

28
Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 2012/10
We reserve the right to make any changes due to technical modifications.
Boiler block assembly7
z Secure both slotted hinge lobes with one M12 × 25
hexagon bolt each to the burner door.
z Hook the burner door with the hinge lobes onto the
hinge pins.
z Close the boiler door.
7.4.4 Fitting the boiler jacket
Installation of the boiler back panel
z Screw spacer pins to the rear section.
Fig. 32 Hooking on the burner door (here: on the r.h. side)
1 M12 × 25 hexagon bolt
CAUTION!
SYSTEM DAMAGE
due to leaking burner door.
z Tighten the hexagon bolts of the burner
door evenly.
Fig. 33 Spacer pin installation