Install Instructions

Boiler installation 8
39
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 2012/10
8.7 Electrical connections
This section only applies to boilers using Buderus
controls.
8.7.1 Fitting the Logamatic control panel
z Locate the push-in hooks of the Logamatic control
panel in the slots.
z Push the control panel towards the burner door.
z Let the flexible hooks of the control panel click into
the openings by pushing the control panel down.
z Remove the Logamatic control panel cover. First
remove the cover screws.
z Secure the control panel with self-tapping screws.
WARNING!
DANGER TO LIFE
from electric shock.
z Only qualified electricians are permitted
to carry out electrical work.
z Before you open the control: shut off
electrical supply and secure against
accidental activation.
z Please observe all installation
instructions.
Fig. 52 Fitting the control panel
1 Flexible hooks
2 Locking tabs
3 Slots
4 Openings
1
4
2
3
Fig. 53 Removing the cover
1 Cover screws
2 Self-tapping screws
1
2