Install Instructions

Boiler maintenance 11
49
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 2012/10
11.3 Boiler cleaning
The boiler can be cleaned with brushes and/or by a wet
method. Cleaning equipment is available as accessory.
z Open burner door by removing the two hexagon bolts
on the sides.
11.3.1 Cleaning the boiler with cleaning brushes
z Note the position of the flue gas baffle plates to
enable their correct re-installation later.
z Remove the flue gas baffle plates from the flue gas
flues.
z Clean the flue gas baffle plates with one of the two
cleaning brushes.
z Clean the flue passages by turning the round
cleaning brush.
CAUTION!
DANGER OF BURNS
by touching hot boiler parts.
z Wear appropriate protective gloves or
use pliers.
Fig. 68 Open the burner door
1 Combustion chamber
2 1. flue gas pass
3 2. flue gas pass
1
3
2
Fig. 69 Brushing out the flue gas passages