Quick Setup Guide - AirStation WHR-G54S Wireless Cable/DSL Smart Router Package Contents • WHR-G54S AirStation • Antenna • Base • AC adapter and power cable • CAT5 LAN cable • Utility CD with Manual • Quick Setup Guides • Warranty Statement www.buffalotech.com v2.
Step 1: Connect Your Equipment A. Screw the antenna into the top of your AirStation. It will usually work best if configured to point straight up. Attach the stand if desired. B. Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or DSL modem. C. Connect the RJ-45 Ethernet cable from your cable or DSL modem to the WAN port on your AirStation. This is the only port that will work for your internet connection. D.
Step 2: Configure Your Router Next, you need to configure your router. This is done from a web browser on a computer connected to the router. A. Launch the web browser on the computer that you’re going to use to configure the AirStation. The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server. B. Your web browser should automatically load a web page.
AOSS Step 3: Configure Wireless Settings AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is very easy. If your client device doesn’t support AOSS, or you want to configure your wireless network manually, turn to page 5. A. Hold down the AOSS button on the top of your AirStation for a few seconds.
Step 3 (without AOSS): Configure Wireless Settings Manually If your wireless client doesn’t support AOSS, you’ll have to configure it manually. From a web bowser on a PC on the network, log in the AirStation configuration utility (as shown on page 3). This will take you to the Home page, where you can click on the System Info tab. The System Info page gives you all the information you might need to configure your non-AOSS wireless client.
Congratulations! Your AirStation is installed. For advanced settings and more detailed information, consult the User Manual, located on your AirStation CD. Contact Information: Buffalo Technology (USA), Inc. 4030 West Braker Lane, Suite 120 Austin, TX 78759-5319 General Inquiries: Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: sales@buffalotech.