Owner`s manual

6. Push and pull the child restraint in different
To rernove the child restraint, just unbuckle the vehicle's
safety belt and remove the lockirlg clip. Let the safety belt
go back all the way. The safety belt will move freely again
and be ready to work for an adult or larger child passenger.
directions
to be. sure it. is secure.
Lap-Shoulder Belt System B
You'll be using the lap-shoulder belt.
See the earlier part about the top strap
if the child
restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
2. Secure the child in the child restraint as the
instructions
say.
portions of the vehicle's safety belt through or around
3. Pick up the latch plate, and run the lap and shoulder
the restraint.
The child restraint instructions will show
you how. Tilt the latch plate to adjust the belt if needed.
If' the shoulder belt goes in .front of the child's face or
neck, put it. behind the child restraint.
positioned
so you would be able to unbuckle the
safety belt quickly if you ever had to.
4. Buckle the belt. Make sure the release button is
, ."
., r
5. To tighten the belt, pull the shoulder belt while you
push down
011 the child restraint.
1-36