Instructions / Assembly

INSTALLATION INSTRUCTIONS (CONT.)

OUTDOOR PROPANE GAS GRIDDLE INSTALLATION SPECIFICATIONS

NOTE:

- Vents must be provided for combustion air and ventilation on both sides of built-in cabinet.

- When choosing a location for your gas griddle keep in mind that it should never be located under any overhead combustible construction.

- The sides and back of the griddle should not be any closer than 21 inches to combustible construction.

- DO NOT store empty or full spare tanks under or near this or any other appliance.

- There must be a minimum of 6” counter space behind the griddle in order to allow the griddle hood to clear properly.

- The cylinder valve on the tank must be readily accessible for hand operation. The tank must be isolated enough to where it is shielded from

radiation, open flames and protected from foreign matter such as hot drippings.

- There must be access so the tank can be connected, disconnected, inspected and leak tested outside of the cabinet. As well as access so that

connections which could be disturbed when installing the tank in the cabinet can be leak tested inside the cabinet.