Instruction Manual

4
SEt Up
3. ATTACH TABLE
A. Attach front of table to base,
using Item D screws. Tighten
with #3 Phillips.
B. Attach back of table to tail using
Item E self tapping screws.
Tighten with #2 Phillips.
4. TO ATTACH HANDLE:
Insert Item F screws and tighten with 1/2”
(13mm) wrench.
Note: To ensure correct alignment, start each of
the bolts by hand before using wrench.
5. ATTACH ANGLE GUIDE
Install angle guide and tighten Item G thumbscrew.
3
4
3B
3A
Item E
Item D
Item F
Tail
Item G
5