INSTALLATION Manual Adjustable Power Punch Description Adjustable Power Punch Rapid Power Part # 40602 7000 series: 7710, 7810 8000 series: 8100, 8200, 8300, 8400 8010 series: 8110, 8210, 8310, 8410 9050 series combines: 9550, 9650, 9750
Introduction Introduction: Introduction: This instructions set is for the Power Punch power module and the Adjustable Power Punch power module. These modules are specifically made for John Deere tractors running a Bosch fuel pump. This instruction set only instructs how to install and operate the power module on the tractors in the application chart. This product should not be used on any other John Deere product. TABLE OF CONTENTS INTRODUCTION..............................................................
Bill of Materials BILL OF MATERIALS 1. Power Punch Module 2. Wiring Harness 3. Velcro Pad 4. Four Zip Ties 3. 4. 2. 1.
Product Description Product Description: The product is made up of three different parts, the module box, the wiring harness which includes the plugs, and the flip switch. Things to note on each part: The Module Box: The module box holds the guts of the product, the circuit board, it is very important that when this module gets mounted during installation that it is away from extreme heat and that it is not prone to a lot of moisture.
Installation Installation Instructions: 1. Locate the fuel pump plug under the hood and on top of the fuel pump, it is not necessary to remove the hood for the install. The fuel pump and plug are located on the left side of the tractor if you are facing the front of the tractor. Identify the plug by looking for a six prong plug with a green bushing, identical to the Bully Dog plugs on the Power Punch power module. 2. Disconnect the stock female plug from the stock male plug. 3.
Operating Instructions Operating Instructions: 1. After completing the installation of the module, set the toggle to 10% and turn the tractor or combine on to test if the module is working. If the tractor starts then the module is working. If the tractor does not turn on then check all of the connections on the install to be sure that they are secure and then attempt to start the tractor again. 2.
Notes 6
Doc.# 40602-99 V2.0 Check out more of our Adrenaline Pumping products! Downloaders Intake Systems Triple Dog GT Exhaust Systems ® Free Technical Support at: 866-bullydog (866-285-5936) See More at: bullydog.
