Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
1.)
2.)
A
B
D
C
EXAMPLE
Parts bag located here
Locate all hardware & components before discarding packaging
Mounting Screw
F(Ground Screw)
Outlet Box
Cross Bar
Nipple
C(Screw Nut)
Chain Holder
Chain
Canopy
Outlet Box
D1(Wire Connector)
Chain Holder
Chain
Canopy
Cleaning & Care:
Page 3 of (3)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
A
B
D
C
1.Install top loop A to center stem and attach
appropriate amount of chain to loop to achieve
desired mounting height. Thread wire through
every 3rd loop of chain.
2. Remove ring from loop and slide down chain.
Place canopy onto chain and let slide to top of fixture.
Install nipple and cross bar into top of chain loop
Thread wire through loop and nipple.
Install mounting bar to outlet box.
3. Wire fixture wire leads to outlet box wires.
Wire copper ground wire from fixture to ground
from outlet box. Pull canopy and screw ring up
chain to ceiling and tighten securely.