Service manual
8
INSTALLING THE DRIP TRAY AND FLIP DOWN CUP TRAY
• Place the SST Cover in the recessed area of the Drip Pan.
• Slide the Drip Pan under the front of the LCR-2 and align the tabs with the legs.
• Insert the hinge pins of the Cup Tray into the notched bracket on the splash panel and rotate the Tray into
place.
• The Cup Tray should be down for serving individual cups of coffee.
• The Cup Tray can be ipped up out of the way for lling carafe’s and/or airpots.
WARNING: The center leg of Cup Tray must be supported by the Drip Tray during use. Do not use the Cup Tray
if the Dispenser legs have been extended and/or the Drip Tray has been removed. Failure to support the Cup Tray
during use can cause damage to the Cup Tray and/or spillage of HOT Liquids.
36026.1 010313