User's Manual

Page 23
REVIEW RECIPES/MODIFY RECIPES/SET UP NO
NAME COFFEE NAMES:
This function has three parts. It allows the operator
to view the brew settings for the various coffee names
programmed into the brewer.
It also allows the operator to modify (change) any
of the BREW VOLUMES, BYPASS PERCENTAGES,
PULSE BREW TIMES and DRIP-OUT TIMES for a
particular coffee name programmed into the brewer.
Finally, this function is used to set up the NO NAME
coffee BREW VOLUMES, BYPASS PERCENTAGES,
PULSE BREW TIMES and DRIP-OUT TIMES.
Procedure for reviewing recipes:
1. Press and hold the ® pad until the display reads
1. Press and hold the upper right hidden switch ®
until the display reads UNITS. Release the switch,
then press and release switch until the display
reads REVIEW RECIPES.
P2442
2. Press YES to proceed. The display should now
read NO-NAME, along with MODIFY, SHOW and
NEXT.
3. Press and release SHOW. The screen will scroll
through all the brew settings for that particular
coffee name. When finished, the display will return
to the coffee name just viewed.
4. To see settings again, press SHOW. To advance
to the next coffee name, press NEXT.
5. To exit, press NEXT until the display reads THAT
WAS THE LAST RECIPE.
6. After 5 seconds, the display will return to the
REVIEW RECIPES screen. Press and release NO
to advance to the next function screen, or press
and release the ON/OFF switch located on the front
switch panel to exit the programming mode and
return to the MAIN SCREEN.
PROGRAMMING THE BREWER (cont.)
(COFFEE NAME)
MODIFYSHOWNEXT
THAT WAS THE
LAST RECIPE
NO-NAME
MODIFYSHOWNEXT
REVIEW RECIPES?
NO YES
EXIT TO
NEXT FUNCTION
SCREEN
SCROLLS THROUGH ALL
BREW SETTINGS FOR
NO-NAME COFFEE
SCROLLS THROUGH ALL
BREW SETTINGS FOR ANY
OTHER OFFEE NAMES
STORED IN BREWER'S MEMORY
WHEN THE LAST COFFEE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
35879.1 071405