Instructions
26 | English BURGcam REC 3511
Description
Supported BURG-WÄCHTER WIFI camera models
•
BURGcam MOVE 301
•
BURGcam SMART 302 / SMART 3020
•
BURGcam DOME 303 / DOME 3030
Getting started
•
Setup your BURG-WÄCHTER WIFI camera (see above for camera models)
•
Connect the recorder to your router using the supplied network cable
Note:
The recorder itself is not WIFI-enabled. However, it supports WIFI devices
•
Use the supplied power adapter to connect the recorder to power. The
recorder will boot automatically once connected to power (there is no
ON / OFF power button). During the booting process, you will hear a beep
sound
•
The router will assign an IP address to the camera and to the recorder
(via DHCP)
Note: The camera and the recorder have to be in the same network
(IP number range) as the router.
•
Download BURGcong Tool from our website
https://www.burg.biz/c/videouberwachung/.
Note
You may also use the recorder without a PC / laptop by connecting it via
HDMI or VGA to your monitor. In this case, please also connect the supplied
mouse to the recorder. The overall look and structure of the user interface is
different to the web access, however the functions are identical.
•
BURGcam BULLET 304 / BULLET 3040
•
BURGcam ZOOM 3060 / ZOOM 3061
1 Video In
2/6 Audio In/Out
3 VGA Monitor out
4 Power cable fastener
5 GND, Ground End
7 HDMI media interfacet
8 Network port
9 USB port
10 12VDC power input