Instructions
BURGcam REC 3511 English | 27
Device initialization using the BURGcong tool
•
Start the BURGcong tool after successful installation
•
Select the desired device(s) from the list. Place a tick next to the device you
want to set up. Click on to "Initialize" to initialize the selected devices with
a personal Password to be set up.
•
In the next step conrm the selection of the device(s) and click on
"Initialize".
•
Enter the data required for initialization.
•
Administrator password must be entered twice for security reasons.
•
E-mail address of the administrator for a reset to Factory setting if the
password has been forgotten
•
Then click on "Next".
Note: In Europe, the PAL (P) standard is generally used.