Instructions
36 | English BURGcam BULLET 3040 BURGcam BULLET 3040 English | 37
Description
Reset: Press and hold the button for approx. 8 seconds
until the control LED extinguishes in order to reset
the camera congurations to factory default settings
Status indicator light:
Red: Booting
Green slowly ashing: Booting completed; waiting for
WiFi connection
Green quickly ashing: WiFi connection in progress
Green: WiFi connection successful; normal
operation
Red and green lights
ashing alternately: Camera upgrade
Red slowly ashing: Network connection failed or
disconnected
Red quickly ashing: Camera malfunction, booting failed,
alarm or SD card malfunction
Cover
MicroSD card slot
Waterproof ring
WiFi antenna
Locking screw
Installation
Preparations
Checklist:
1 Power supply is available at installation spot
2 For WIFI operation: WIFI signal strength is good
enough for high quality video streaming.
Maybe a repeater is required.
3 No power cable or water pipes can be damaged
during installation
4 There are no obstacles in view eld of the camera at
desired location. Note: Check the plant growth
5 For WIFI operation: WIFI password is ready to hand
6 5 Ghz frequency band of the Dual-Band Router
disabled
7 Smartphone connected to the WIFI SSID in which
the camera is to be set up.