Instructions
40 | English BURGcam BULLET 3040 BURGcam BULLET 3040 English | 41
Option 1 - Setup via LAN (network cable) and PC
with the „BURGcong Tool“ software
Connect the camera to your local router using the network cable
(not supplied). Make sure the camera and PC/notebook are on the
same network. Install the BURGcong tool and start the application.
The camera is supplied with DHCP (automatic IP assignment) as
standard.
If your network uses xed IPs the camera is displayed with
IP 192.168.1.108. In this case, switch your PC IP to the same
network.
Select the desired device and click on the browser icon „ “ (Fig. 1)
The Setup Wizard appears and guides you through the menu.
Follow the instructions and assign a secure password for the
administrator account.
To add the device to the BURGcam App follow the instructions
of „Integrating the camera in the BURGcam APP“.
Fig 1
BURGcong Tool:
Click here to download.
Alternatively you can download the BURGcong
tool from the homepage www.burg.biz