Instructions

44 | English BURGcam BULLET 3040 BURGcam BULLET 3040 English | 45
Option 3 - Setup via LAN (network cable)
1. Connect the camera to the network by using a network cable.
Connect the power supply either. After booting, the system is
ready to operate.
Continue on page 45, „Assign device password“.
1. Select „Device Manager“ from
the main menu.
2. Tap + and select „Camera“.
3. Select „Device Initialisation“,
the rst time you set up the system.
Assign device password - Initial setup via smart-
phone and the BURGcam App