Instructions
56 | English BURGcam BULLET 3040 BURGcam BULLET 3040 English | 57
Safety instructions
power outlet only one way. This is a safety feature. If you are
unable to insert the plug into the outlet, try reversing the plug.
Do not defeat the safety purpose of the polarized plug.
• If the appliance is powered through a grounding-type plug, the
plug will only t into a grounding-type power outlet. This is a
safety feature. If your outlet does not have the grounding plug
receptacle, contact your local electrician.
• Route power cords and cables in a manner to protect them
from damage by being walked on or pinched by items places
upon or against them.
• For protection of the appliance during a lightning storm or
when it is left unattended and unused for a longer period,
unplug the appliance from the wall outlet. Disconnect any
antennas or cable systems that may be connected to the
appliance. This will prevent damage to the appliance due to
lightning or power-line surges.
• Do not overload wall outlets and extension cords as this can
result in a risk of re or electric shock.
• Never insert items into the openings of the appliance. They may
touch parts under electric current which may cause an electric
shock.
• Never pour any liquids over the appliance.
• In case of any operating interruption or a complete operating
failure please switch off the appliance and disconnect it from
the wall outlet. Never attempt to service or repair the appliance
yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to quali-
ed service personnel.
• When replacement parts are required, be sure that the service
technician uses replacements parts specied by the manufac-
turer or that have the same characteristics as the original part.
Unauthorized substitutions may result in re, electric shock or
other hazards.
• Upon completion of any service or repairs to the appliance, ask
the service technician to perform safety checks to verify that
the appliance is in proper operating condition.
• The appliance must only be installed by qualied service
personnel and has to comply with local specications and
regulations.
• Never point the camera at an object with a high degree
of luminance. Bright vertical or horizontal lines can result
in a distortion (outshine) of the entire image on the monitor.
This artifact is not an error but a particularity of semi-
conductor CCDs when they are directly exposed to
a powerful light source.
• At the installation site, the camera has to be adjusted
to the given light conditions (see OSD).
• Please respect the local legal regulations on waste if
you need to dispose of discarded appliances.