Data Sheet
Table Of Contents
- 1. General Technical Data
- 2. Product versions
- 3. Control functions
- 4. Approvals
- 5. Materials
- 6. Dimensions
- 7. Performance specifications
- 7.1. Fluidic data
- Overview of fluidic data for flow below seat (for gases, steam and liquids)
- Pilot pressure diagram with flow direction below seat (control function B, seat seal PTFE)
- Overview of fluidic data with flow above seat (for gases and steam)
- Pilot pressure diagram with flow direction above seat (control function A, seat seal PTFE)
- 7.2. Operating limits
- 7.1. Fluidic data
- 8. Product accessories
- 9. Networking and combination with other Bürkert products
- 10. Ordering information
Product Enquiry Form
Pneumatic Shut-o Valves
1 | 2
© Christian Bürkert GmbH & Co. KG, subject to change
Visit this product area on the website
Product Enquiry Form - Pneumatic Shut-o Valves
Thank you for your interest in our products! In order to provide you with optimum advice, please ll out the following form and send it to your Bürkert
representative or e-mail address: info@burkert.com. All information submitted will of course be kept strictly condential.
Pleasellintherequiredelds!
*
*Note: The interactive functions of this PDF may be restricted depending on the PDF reader used.
Personal Information
Company Contact person
Customer no. Department
Street Postcode / Town
Telephone no. Email
Delivery
Quantity Required delivery date
Operating data
Function
(Function of the control valve in the
process / process description)
Pipeline DN PN
Operating medium
Type of medium Fluid Steam Gas
Operating pressure Unit
Medium temperature ºC / ºF
Ambient temperature ºC / ºF
Valve body
Construction Angle seat valve Globe valve
Actuator material Stainless steel/PPS Stainless steel PPS PA
Housing material Stainless steel Gunmetal
Seat seal
PTFE NBR PEEK FKM
EPDM Other
DN / Nominal pressure DN PN
Flowcoecient K
V
m
3
/h C
V
GPM(US)
Connection
Flange DIN EN 1092-1 ANSI B16.5 JIS 10K
Thread G NPT RC
Weld DIN EN ISO 1127 /
ISO 4200
DIN 11850 2 /
DIN 11866 A
ASME BPE
Clamp ASME BPE DIN 32676 A
(tube ISO 4200)
DIN 32676 B
(tube DIN 11850)
Other
Valve data
Circuit Function
A: Normally closed B: Normally open I: Double acting
Control pressure Min. Max.