Instructions
2
1 OPERATING INSTRUCTIONS
The operating instructions contain important information.
▶ Read the operating instructions carefully and follow the safety
instructions in particular, and also observe the operating conditions.
▶ Operating instructions must be available to each user.
▶ The liability and warranty for the device are void if the operating
instructions are not followed.
1.1 Symbols
▶ designates an instruction to prevent risks.
→ designates a procedure which you must carry out.
Warning of injuries:
DANGER!
Imminent danger. Serious or fatal injuries.
WARNING!
Potential danger. Serious or fatal injuries.
CAUTION!
Danger. Minor or moderately severe injuries.
Warns of damage to property:
NOTE!
2 INTENDED USE
Incorrect use of the solenoid valve can be dangerous to people,
nearby equipment and the environment.
▶ The device type 6213 EV / 6281 EV is designed to control, shut o
and meter neutral media up to a viscosity of 21 mm
2
/s.
▶ Provided the cable plug is connected and installed correctly, e.g.
Bürkert Type 2508, the device satises protection class IP65 in
accordance with DIN EN 60529 / IEC 60529.
▶ Use according to the permitted data, operating conditions and
conditions of use specied in the contract documents and oper-
ating instructions.
▶ In the case of explosion-proof devices (see rating plate or addi-
tional plate) also follow the operating instructions for the coil /
pilot control.
▶ Correct transportation, correct storage and installation and careful
use and maintenance are essential for reliable and problem-free
operation.
▶ Use the device only as intended.
2.1 Denition of term
In these operating instructions, the term “device” always refers to the
Type 6213EV / 6281EV.
english