Data Sheet

Type 6213
3 | 15
Visit product website 
1. General technical data
Product properties
Materials
Body Brass acc. to DIN EN 50930 - 6
Stainless steel 1.4408
Gunmetal (external thread) DN10…DN20
Coil Polyamide, epoxy (insulation class H)
Seal NBR, FKM, EPDM
Inner part of valve Brass body: Brass, stainless steel and PPS
Stainless steel body: Stainless steel and PPS
Gunmetal body: Stainless steel and PPS (external thread) DN10…DN20
Orice Standard: DN10…DN40
HP00: DN13…DN20
Electrical data
Voltage tolerance ± 10 %
Voltages Standard: 024/DC, 024/50, 230/50, 110/50, 120/60
HP00:24V(50…60Hz),230V(50…60Hz)
Performance data
Duty cycle 100 % continuous rating; KD coil; max. rating 6 circuit switches/minute
Response times
1.)
AC / DC
DN10…DN13 Opening:10…100ms
Closing:100…200ms
DN20 Opening:200…300ms
Closing:400…700ms
DN25…DN40 Opening:300…400ms
Closing:800…1400ms
Power consumption Dependingonoriceandcoilsize
For detailed information, see “5.Performancespecications”onpage9
Medium data
Medium
NBR Neutraluids,water,hydraulicoil,oilwithoutadditives
FKM Per-solutions, hot oils with additives
EPDM Oilandfat-freeuidsandgases
Medium temperature
NBR - 10 °C… + 80 °C
FKM 0 °C… + 90 °C with polyamide coil
0 °C… + 120 ºC with epoxy coil
EPDM - 30 °C… + 90 °C with polyamide coil
- 30 °C… + 100 °C with epoxy coil
Viscosity Max.21mm
2
/s
Approvalsandcerticates
Protection class IP65 with cable plug and cable connection
IP65 with terminal box
(further versions on request)
Product connections
Electrical connection Tag connector acc. to DIN EN 175 301 - 803 Form A
(see “6.4.Orderingchartaccessories”onpage14)
Environment and installation
Installation As required, preferably with actuator upright
Ambient temperature Max. + 55 °C
1.)Measurementwithwateratvalveoutlet6barand+20°C.Opening:Pressurebuild-up0to90%,Closing:Pressuredrop100to10