Data Sheet

Type 3285
7 | 14
Visit product website 
4. Device/Process connections
4.1. Analogue
Note:
For parameterisation and conguration of the positioner and the process controller versions, please use the Bürkert Communicator
software tool, “7.2. Software Bürkert Communicator” on page 11.
CircularconnectorM12,8pin Pin Conguration
1
2
3
4
5
6
7
8
1 24VDC
2 Power supply GND
3 Internal use
1.)
4 Internal use
1.)
5 Internal use
1.)
6 Signal input +
7 Signal output
8 Signal GND
Only for positioners and process controllers version, for connection of the parameterization tools: Bürkert Communicator. The con-
nection is via the büS-Stick. Using an adapter cable (M12 8pin to M12 5pin) the büS-Stick can be connected, see “7.2. Software
Bürkert Communicator” on page 11).
Additional for process controller version:
SocketM12,5pin Pin Conguration
3
1
2
4
5
1 24VDC sensor power supply
2 Analogue IN (0…20mA, 4…20mA, 0…5V or 0…10V)
3 GND
4 GND (Bridge acc. to GND Pin3)
5 Not connected
4.2. Digital (Fieldbus)
Note:
For parameterisation and conguration of the positioner and the process controller versions, please use the Bürkert Communicator
software tool, “7.2. Software Bürkert Communicator” on page 11.
CircularconnectorM12,5pin Pin Conguration
4
2
1
3
5
1 Shield
2 24VDC
3 GND
4 CAN high
5 CAN low
Additional for process controller version:
SocketM12,5pin Pin Conguration
3
1
2
4
5
1 24VDC sensor power supply
2 Analogue IN (0…20mA, 4…20mA, 0…5V or 0…10V)
3 GND
4 GND (Bridge acc. to GND Pin3)
5 Not connected