User guide

48
operating and commissioning
Type 8025 / 8035
9.3. Description of the navigation keys and the status LEDs
• Selecting the displayed parameter
• Confirming the settings
LED indicating the status of the relay
2
(LED ON = contact closed)
• Scrolling through the parameters
• Selecting the figure on the left
• Scrolling up the parameters
• Incrementing the figure selected
LED indicating the status of the relay 1
(LED ON = contact closed)
Fig. 52: Description of the display
9.4. Using the navigation keys
You want to... Press...
move between parameters within a level or a menu.
•
to go the next parameter.
•
0......9
to go to the previous parameter.
access the Parameters menu.
ENTER
+ simultaneously for 5 s, in the Process level
access the Test menu.
0......9
+ +
ENTER
simultaneously for 5 s, in the Process level
reset the daily totalizer, from the Process level.
0......9
+ simultaneously for 2 s, when the daily totalizer is
displayed in the Process level
select the displayed parameter.
ENTER
confirm the displayed value.
ENTER
modify a numerical value.
•
0......9
to increase the blinking digit.
•
to select the digit at the left of the blinking digit.
•
0......9
+ to move the decimal point.
English