User guide

50
operating and commissioning
Type 8025 / 8035
9.6.1. Choosing the display language
When the device is energized for the first time, the display language is English.
LANGUAGE ENGLiSh
DEUtSCh
FRANçAiS
itALiANO
0......9
→ The chosen language is active as soon as the
ENTER
key is
pressed
UNit
Fig. 55: Diagram of the "LANGUAGE" parameter of the Parameters menu
→ If you do not want to adjust another parameter, go to the "END" parameter of the Parametersmenu and press
ENTER
to
save the settings and go back to the Process level.
9.6.2. Choosing the flow rate units, the number of decimals and the units of the
totalizers
The max. flow rate that can be displayed depends on the number of decimals chosen:
• 9999 if the number of decimals = 0.
• 999,9 if the number of decimals = 1.
• 99,99 if the number of decimals = 2.
• 9,999 if the number of decimals = 3.
The max. flow rate that can be displayed by the totalizers depends on the volume unit chosen:
• 9 999 999 if the volume unit chosen is "litre";
• 999 999 if the volume unit chosen is "m
3
" or "gallon".
• When the flow rate unit is changed convert the flow rate values set within the "CURRENT", "PULSE" and "RELAYS"
parameters of the Parameters menu.
The "UNIT" parameter makes it possible to choose:
• the flow rate units;
• a fixed number of decimals (choice 0, 1, 2 or 3) to display the flow rate in the Process level;
• the volume units of the totalizers if the unit previously chosen is in litres, in m
3
or in gallons.
English