User guide

7
Intended use
Type 8025 / 8035
2. INTENDED USE
Use of the device that does not comply with the instructions could present risks to people, nearby installations and
the environment.
• The compact version of the flowmeter type 8025 or 8035 is designed to measure the flow rate of a liquid and to totalise
the volume of a liquid.
• The remote version of the flowmeter type 8025 is a transmitter that must be connected to an 8020 or an 8030 flow sen-
sor with a sinus or a pulse output, only in "Low Power" version.
• This device must be protected against electromagnetic interference, ultraviolet rays and, when installed outdoors, the
effects of climatic conditions.
• This device must be used in compliance with the characteristics and commissioning and use conditions specified in the
contractual documents and in the operating instructions.
• Requirements for the safe and proper operation of the device are proper transport, storage and installation, as well as
careful operation and maintenance.
• Only use the device as intended.
→ Observe any existing restraints when the device is exported.
English