User Manual

10
9
8
7
6
5
4
3
2
1
0
-15 0 +20 +40+60
PVDF
PVDF (PN10)
PVC (PN10)
PP (PN10)
PVC + PP
11
+80
application range
P fluid (bar)
T fluid (°C)
Metal
Fig. 5: Type 8025, temperature-pressure dependency curves,
depending on the S020 fitting material
10
9
8
7
6
5
4
3
2
1
0
-30
-10 +10 +30 +50+70 +90 +110
PVDF (PN10)
PVC (PN10)
PP (PN10)
PVC + PP
PVDF
16
15
14
13
12
11
A
Metal
application range
P fluid (bar)
T fluid (°C)
Fig. 6: Type 8035, temperature-pressure dependency curves,
depending on the S030 sensor-fitting material
7. INSTALLATION
7.1. Safety instructions
danger
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
Risk of injury due to electrical voltage.
• Shut down and isolate the electrical power source before car-
rying out work on the system.
• Put the power switch to OFF before carrying out work on the
device.
• Observe all applicable accident protection and safety regulati-
ons for electrical equipment.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
11
Installation
Type 8025/8035 battery powered
English