User Manual

8.6.1. Choosing the display language
When the device is energized for the first time, the display language
is English.
lANGUAGE ENGlish
DEUtsCh
FRANçAis
itAliANO
→ Confirm the dis-
played language:
The selected lan-
guage is immediately
active.
UNit
Fig. 16: Diagram of the "LANGUAGE" parameter of the
Configuration level
8.6.2. Choosing the flow rate units, the
number of decimals and the units of
the totalizers
The max. flow rate that can be displayed depends on the
number of decimals chosen:
• 9999 if the number of decimals = 0,
• 999,9 if the number of decimals = 1,
• 99,99 if the number of decimals = 2,
• 9,999 if the number of decimals = 3.
The maximal volume that can be displayed by the totalizers
depends on the unit of the chosen volume:
• 9 999 999 if the chosen volume unit is "litre",
• 999 999 if the chosen volume unit is "m
3
", or "gallon".
The "UNIT" parameter makes it possible to choose:
• the flow rate units.
• a fixed number of decimals (choose 0, 1, 2 or 3) to display the
flow rate in the Process level.
• the volume units of the totalizers if the unit previously chosen is in
litres or in m
3
.
19
Operating and commissioning
Type 8025/8035 battery powered
English