User Manual

K-FACtOR tEACh NO
0000.0 l
K=48.30FiltER
0......9
tEACh Y Fill END
0100.0 l
→ Charge the pipe to fill the tank.
→ When the tank is full, confirm "FILL END":
Do not enter a volume value of 0,0
because the calculated K-factor would
be of 0,0 and the device would not be
operating.
→ Enter the volume (value > 0,0 and ≤ 9999,9)
of fluid that passed in the circuit.Confirm.
The device calculates
the K factor of the
fitting and displays it.
ENTER
ENTER
ENTER
ENTER
The teach-in procedure is done depending on a known volume.
→ Prepare a tank with a known volume.
→ Stop the fluid circulation.
→ confirm "TEACH Y.": "FILL END." is displayed.
ENTER
Fig. 19: Teach-in procedure depending on a volume
22
Operating and commissioning
Type 8025/8035 battery powered
English