User Manual

4. GENERAL INFORMATION
4.1. Manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2. Warranty conditions
The condition governing the legal warranty is the conforming use
of the 8025 or the 8035 in observance of the operating conditions
specified in this manual.
4.3. Information on the Internet
You can find the user manuals and technical data sheets regarding
the type 8035 or 8025 at: www.burkert.com
5. DESCRIPTION
5.1. Area of application
The battery powered flowmeter-totalizer 8025 or 8035 is intended
to measure the flow rate and totalize the volume of liquid.
5.2. General description
The device type 8025 is made up of a flow sensor with paddle
wheel and an electronic module with display.
The device type 8035 is made up of an SE35 electronic module
and of an S030 fitting-sensor incorporating the paddle wheel which
measure the flow.
The device is fed with 2 batteries.
5.3. Description of the name plates
TOTAL :8025- SUPPLY: BATT9V
COIL SHORT - OUT: /
S/N 1439
00418403 W43MA
Made in France
1
2
4578
3
6
Fig. 1: Name plate of the
8025
1. Type of the device
2. Power supply
3. Type of output: without
4. Manufacturing code
5. Conformity logo
6. Specification of the flow sensor
7. Serial number
8. Order code
6
General information
Type 8025/8035 battery powered
English