Owner's manual

Adjustment, commissioning

Type 8045

The display shows the K factor of the

fitting, may it have been entered or

determined by a teach-in procedure;

this K factor is currently used by the

device

→ Edit the parameter.

K-FACtOR K=10.000

REtURN

→ Enter the K factor (value between 0,0001 and

9999,9) of the fitting used.

→ Confirm the displayed value.

K=2.8500

OUtPUt VALiD N/Y

Is only displayed if the K factor has been changed.

→ Confirm the entered K factor or not.

Fig. 23: Entering the K factor of the fitting used

→ If you do not want to adjust another parameter, go to the "END" parameter of the Parameters menu and press

ENTER

to save the settings or

not and go back to the Process level.

English