Owner's manual

Technical data

Type 8045

1. Measured value and type of the device

2. Specification of the flow sensor

3. Specification of the DO1 digital output

4. Specifications of the relay outputs DO2 and DO3

5. Electrical power supply and current consumption

6. Manufacturing code

7. Conformity logo

8. Warning: Before using the device, take into account the tech-

nical specifications described in these operating instructions.

9. Fluid temperature range and fluid nominal pressure

10. Protection class of the device

11. Specification of the DI1 digital input

12. Serial number

13. Order code

14. Shows the flow direction

Fig. 1: Name plate of the 8045 flowmeter

6. TECHNICAL DATA

6.1. Conditions of use

Ambient temperature -10 to +60 °C

Air humidity < 85%, non condensated

Height above see level max. 2000 m

Protection class acc.

to EN 60529

IP65, device wired and cable glands

tightened and cover lid screwed tight.

6.2. Conformity to standards and

directives

The device conforms to the EC directives through the following

standards:

• EMC: EN 61000-6-2, EN 61000-6-3

• LVD: EN 61 010-1

• Vibration: EN 60068-2-6

• Shock: EN 60068-2-27

Pressure: article 3§3 of the Pressure Directive 97/23/CE. Acc. to

the Pressure Directive 97/23/CE: the device can only be used in the

following cases (depending on the max. pressure, the DN of the pipe

and the fluid)

Type of fluid Conditions

Fluid group 1, par. 1.3.a Forbidden

English