Manual

Table Of Contents

SE 56

For the transmitters without display, the

configuration is made through ISOCON (cable

and software needed).

As the housing will be opened by the installer,

the IP degree may be compromised, so follow

the torques mentioned.

KEYBOARD

SHORT PRESSING (< 1 SECOND):

Increases the numeric figure or the parameter selected by the cursor

Returns to the previous item on the menu

Batch start/stop (when enabled)

LONG PRESSING (> 1 SECOND):

Decreases the numeric figure or the parameter selected by the cursor.

Proceeds to the next item on the menu

SHORT PRESSING (< 1 SECOND):

Moves/positions the cursor rightward on the input field

Proceeds to the following item of the menu

Change the display of the process data

LONG PRESSING (> 1 SECOND):

Moves/positions the cursor leftward on the input field

Returns to the previous item on the menu

SHORT PRESSING (< 1 SECOND):

Enter/leave the selected function

Enables the main menu for the instrument configuration

Cancels the selected function under progress

LONG PRESSING (> 1 SECOND):

Leaves the current menu

Enables the totalizer reset request (when enabled)

Confirms the selected function

CONFIGURATION of a device without dis