Manual

4
2 INTENDED USE
Use of this device that does not comply with the
instructions could present risks to people, nearby
installations and the environment.
The flow transmitter or pulse divider is an electronic
module that is designed for use in industrial environ-
ments. The electronic module must be associated to a
Bürkert flow sensor.
Do not use the device outdoors.
Protect the device against electromagnetic interference
and ultraviolet rays.
Use the device in compliance with the characteristics
and commissioning and use conditions specified in the
contractual documents and in the user manual.
Requirements for the safe and proper operation of the
device are proper transport, storage and installation, as
well as careful operation and maintenance.
Only use the device as intended.
If exporting the system/device, observe any existing
restrictions.
English
5
3 BASIC SAFETY
INSTRUCTIONS
These safety instructions do not make allowance for any
contingencies and events which may arise during the ins-
tallation, operation and maintenance of the devices.
local safety regulations the operator is responsible for
observing these regulations, also with reference to the
installation personnel.
note!
Electrostatic sensitive components/modules!
The device contains electronic components, which react
sensitively to electrostatic discharge (ESD). Contact with
electrostatically charged persons or objects is hazardous
to these components. In the worst case scenario, they
will be destroyed immediately or will fail after start-up.
• Observe the requirements in accordance with EN
61340-5-1 and 5-2 to minimize/avoid the possibility of
damage caused by a sudden electrostatic discharge!
Also, ensure that you do not touch electronic components
when the power supply voltage is present!
English
6
Various dangerous situations
Guarantee a set or controlled restarting of the process,
after a power supply interruption.
Use the device only if in perfect working order and
in compliance with the instructions provided in the
instruction manual.
Observe the general technical rules when installing and
using the device.
Do not use this device in explosive atmospheres.
Do not use this device in an environment incompatible
with the materials it is made of.
Do not subject the device to mechanical loads (e.g. by
placing objects on top of it or by using it as a step).
Do not make any external or internal modifications to
the device.
English
7
4 GENERAL INFORMATION
4.1 Contact Address
To contact the manufacturer of the device, use following
address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
The addresses of our international sales offices are avai-
lable on the internet at: www.burkert.com
4.2 Warranty
The warranty is only valid if the Type 8022 is used as intended
in accordance with the specified application conditions.
4.3 Information on the Internet
The operating instructions and data sheets for Type 8022 can
be found on the Internet at: www.burkert.com
English